The aluminum plate of the anode is oxidized, and a thin layer of aluminum oxide is formed on the surface with a thickness of 5 to 20 microns, and the hard anodized film can reach 60 to 200 microns. The anodized aluminum plate improves its hardness and wear resistance, up to 250-500 kg/mm2, has very good heat resistance, the hard anodized film has a melting point of up to 2320K, excellent insulation, and breakdown ...
Aluminum 1050 and 5052 are two popular grades of aluminum alloys with different properties and applications. Aluminum 1050 is a commercially pure aluminum alloy with a minimum of 99.5% aluminum. It is known for its excellent formability, high corrosion resistance, and good electrical conductivity. Due to its high purity, it is also easy to weld and work with, making it a popular c ...
Do you know the advantages of anodized aluminum plate sheet?Henan huawei Aluminum anodized aluminum plate hardness is relatively high, good scratch resistance, paint-free surface, anti-fouling effect is very good. Metallic aluminum ceiling, Curtain wall aluminum, as well as fire board, cellular aluminum, aluminum veneer is made of anodized aluminum plate for processing products Anodized aluminum plate wider ra ...
VC: heat sealant (PVC heat seal)
OP: protectant
PE: polyethylene (and PE heat seal)
OPA: nylon, polyamine (double-sided corona)
PET: Polyester (regular single side corona)
Only all-purpose glue can heat seal with PET film
VMPET: Aluminized Polyester
PP: heat sealed with PP material, with glue and film
PS: heat sealed with PS material, only glue
AL: 8011, 8012, 8021 H-state (hard state) aluminum foil 0-st ...
6061-T6 Aluminum Sheet is a popular and versatile alloy that has a wide range of applications across a variety of industries due to its excellent combination of strength, corrosion resistance and workability. The following are some common applications of 6061-T6 aluminum plates: Aerospace Components: 6061-T6 is used in the aerospace industry to build aircraft structures such as wings, fuselages and landing gea ...
Surface pretreatment
No matter what method is used to process aluminum materials and products, there will be dirt and defects on the surface to varying degrees, such as dust, metal oxides (natural or aluminum oxide films formed at high temperatures), residual oil, asphalt marks, artificial Carrying mudra (the main components are fatty acids and nitrogenous
1. Oxalic acid anodizing
Most of the factors that affe ...