Huawei Aluminum 7 systems

1. Supply products

We can provide 1 к 8 series alloy aluminum sheet plates, and we can customize aluminum plates of various alloys, размеры, thicknesses and other rules.

6061 алюминиевый лист

2. Quality control of raw aluminum ingots

Aluminum ingots are all primary aluminum ingots produced from aluminum smelting and alumina electrolysis. The aluminum ingots meet the AOO standard, and the Chinese national standard (GB/T 1196-2008) should be calledaluminum ingots for remelting”. Each batch of aluminum ingots enters our smelting furnace, and we will take samples to determine the alloy composition and trace amounts. Elemental analysis.

The volume of the smelting furnace used in the casting-rolling production line is 60 tons, and we do an alloy composition analysis for every 30 tons. To ensure the stability of the blank alloy.

3. Production management process

After receiving your order, our production dispatcher will arrange the order, the workshop production will receive the production plan, and the production will be carried out. The quality inspector will check the quality in the intermediate link and give feedback to the quality control department.

Unqualified semi-finished products will not flow to the next link and stop loss in time.


4. QC operation process

We use smelting, semi-finished products and finished products for comprehensive quality control.

The special requirements of customers are decomposed into every link for control. Some customers need special alloys, high emphasis, high elongation, high surface hardness, surface brightness, fineness, версия, cleanliness, We will decompose and control many special requirements in every link. To ensure that the finished product and the order requirements are consistent.

The quality inspection department has the right to veto the product quality throughout the company, and the quality inspection department directly reports to the deputy general manager.

If there are non-conforming products in your product, the manager of the QC department and the personnel involved in the inspection will have corresponding performance penalties.

5. Packaging process

The packaging of aluminum products is inseparable from wood, but also has a moisture-proof effect. Поэтому, our aluminum plates, aluminum coils, aluminum wafers, aluminum foils and other products are packaged with more than three layers, Например, PVC+pearl cotton+waterproof kraft paper +PVC. Both wooden pallets and wooden boxes are treated in a harmless manner.

We fully consider the difference in temperature in different regions, наземный транспорт, sea transportation and other transportation conditions.

All aluminum products, before packaging, we have to stand still and air-cooled, and wait for the temperature of the aluminum products to drop before packaging.

6. Warehouse and transportation loading process

After the product is packaged, it will be warehousing and transported from the packaging area to the finished product warehouse for sorting and placement. The finished product warehouse is a dry warehouse that is well ventilated, rain-proof and moisture-proof.

The stacking of aluminum plates is not allowed to exceed 6 layers, aluminum foil is not allowed to exceed 5 layers, and aluminum wafers are not allowed to exceed 2 layers. Each finished product has its own storage QR code, which is convenient to find him when it is shipped.
In order to ensure the accuracy of the incoming and outgoing quantities, the packaging of aluminum products entering the finished product warehouse is not allowed to be opened.

In the process of loading, whether it is a forklift or a crane, the loading is carried out one piece at a time to avoid damage to the pallet or wooden box during the loading process.

Trucks for inland transportation must be covered with a tarp before leaving the factory to prevent sudden rain from affecting the product packaging and quality during inland transportation.

After arriving at the port, they are directly unloaded from the truck and into the container. Special personnel will take pictures during the process of loading the container. After the container is loaded, it will be reinforced. After the reinforcement, the photo will be taken and the container will be sealed.

7. Послепродажное обслуживание

Если продукт, отправленный в вашу компанию, имеет проблемы с качеством и проверен нашей компанией, наше решение выглядит следующим образом:

  1. Прямая продажа алюминиевого лома на месте, и компенсируем вам разницу.
  2. Если товар, о котором идет речь, возвращается, мы повторно выдадим вам новый квалифицированный продукт. Внутренний фрахт, понесенный в процессе, и морской фрахт для возврата и повторной отправки будет нести мы.

Первоначальное намерение послепродажного обслуживания: пока вы довольны.

  1. Для некоторых клиентов в Африке, Южная Америка и Юго-Восточная Азия, мы предоставляем бесплатный дизайн веб-сайта, чтобы помочь клиентам сделать официальные веб-сайты. Мы надеемся, что наши клиенты смогут связаться с нашими клиентами через официальный сайт при поиске продуктов в Google..
  2. Мы можем помочь клиентам разработать стратегии развития рынка и передать им нашу зрелую модель развития рынка..
  3. План вознаграждения дилера клиента, мы поддерживаем клиентов, чтобы вознаградить топ 3 выдающиеся дилеры по продажам едут в Китай, и мы делаем хорошую работу по обслуживанию и местной поддержке.