हुआवेई एल्युमिनियम 7 प्रणाली

1. Supply products

हम प्रदान कर सकते हैं 1 को 8 series alloy aluminum sheet plates, and we can customize aluminum plates of various alloys, आकार, thicknesses and other rules.

6061 एल्यूमीनियम शीट

2. Quality control of raw aluminum ingots

Aluminum ingots are all primary aluminum ingots produced from aluminum smelting and alumina electrolysis. The aluminum ingots meet the AOO standard, and the Chinese national standard (जीबी/टी 1196-2008) should be calledaluminum ingots for remelting”. Each batch of aluminum ingots enters our smelting furnace, and we will take samples to determine the alloy composition and trace amounts. Elemental analysis.

The volume of the smelting furnace used in the casting-rolling production line is 60 टन, and we do an alloy composition analysis for every 30 टन. To ensure the stability of the blank alloy.

3. Production management process

After receiving your order, our production dispatcher will arrange the order, the workshop production will receive the production plan, and the production will be carried out. The quality inspector will check the quality in the intermediate link and give feedback to the quality control department.

Unqualified semi-finished products will not flow to the next link and stop loss in time.

 

4. QC operation process

We use smelting, semi-finished products and finished products for comprehensive quality control.

The special requirements of customers are decomposed into every link for control. Some customers need special alloys, high emphasis, high elongation, high surface hardness, surface brightness, fineness, संस्करण, cleanliness, We will decompose and control many special requirements in every link. To ensure that the finished product and the order requirements are consistent.

The quality inspection department has the right to veto the product quality throughout the company, and the quality inspection department directly reports to the deputy general manager.

If there are non-conforming products in your product, the manager of the QC department and the personnel involved in the inspection will have corresponding performance penalties.

5. Packaging process

The packaging of aluminum products is inseparable from wood, but also has a moisture-proof effect. इसलिए, our aluminum plates, एल्यूमीनियम कॉयल, एल्यूमीनियम वेफर्स, aluminum foils and other products are packaged with more than three layers, उदाहरण के लिए, PVC+pearl cotton+waterproof kraft paper +PVC. Both wooden pallets and wooden boxes are treated in a harmless manner.

We fully consider the difference in temperature in different regions, भूमि परिवहन, sea transportation and other transportation conditions.

All aluminum products, before packaging, we have to stand still and air-cooled, and wait for the temperature of the aluminum products to drop before packaging.

6. Warehouse and transportation loading process

After the product is packaged, it will be warehousing and transported from the packaging area to the finished product warehouse for sorting and placement. The finished product warehouse is a dry warehouse that is well ventilated, rain-proof and moisture-proof.

The stacking of aluminum plates is not allowed to exceed 6 layers, aluminum foil is not allowed to exceed 5 layers, and aluminum wafers are not allowed to exceed 2 layers. Each finished product has its own storage QR code, which is convenient to find him when it is shipped.
In order to ensure the accuracy of the incoming and outgoing quantities, the packaging of aluminum products entering the finished product warehouse is not allowed to be opened.

In the process of loading, whether it is a forklift or a crane, the loading is carried out one piece at a time to avoid damage to the pallet or wooden box during the loading process.

Trucks for inland transportation must be covered with a tarp before leaving the factory to prevent sudden rain from affecting the product packaging and quality during inland transportation.

After arriving at the port, they are directly unloaded from the truck and into the container. Special personnel will take pictures during the process of loading the container. After the container is loaded, it will be reinforced. After the reinforcement, the photo will be taken and the container will be sealed.

7. बिक्री के बाद सेवा

यदि आपकी कंपनी को भेजे गए उत्पाद में गुणवत्ता की समस्या है और हमारी कंपनी द्वारा सत्यापित है, हमारा समाधान इस प्रकार है:

  1. स्क्रैप एल्युमीनियम को सीधे स्थानीय स्तर पर बेचें, और आपको अंतर के लिए क्षतिपूर्ति करें.
  2. यदि विचाराधीन उत्पाद वापस कर दिया जाता है, हम आपको एक नया योग्य उत्पाद फिर से जारी करेंगे. प्रक्रिया के दौरान किए गए अंतर्देशीय माल ढुलाई, और वापसी और पुनः लदान के लिए समुद्री भाड़ा हमारे द्वारा वहन किया जाएगा.

बिक्री के बाद सेवा का मूल इरादा: जब तक आप संतुष्ट हैं.

  1. अफ्रीका में कुछ ग्राहकों के लिए, दक्षिण अमेरिका और दक्षिण पूर्व एशिया, हम ग्राहकों को आधिकारिक वेबसाइट बनाने में मदद करने के लिए मुफ्त वेबसाइट डिज़ाइन प्रदान करते हैं. हमें उम्मीद है कि Google पर उत्पादों की खोज करते समय हमारे ग्राहक आधिकारिक वेबसाइट के माध्यम से हमारे ग्राहकों से संपर्क कर सकते हैं.
  2. हम ग्राहकों को बाजार विकास रणनीतियों को डिजाइन करने में मदद कर सकते हैं और अपने परिपक्व बाजार विकास मॉडल को अपने ग्राहकों तक पहुंचा सकते हैं.
  3. ग्राहक की डीलर इनाम योजना, हम शीर्ष को पुरस्कृत करने के लिए ग्राहकों का समर्थन करते हैं 3 बिक्री में बकाया डीलरों चीन की यात्रा करने के लिए, और हम सेवा और स्थानीय समर्थन का अच्छा काम करते हैं.