Nedir 14 ölçer alüminyum levha?
“14 ölçer alüminyum levha” alüminyum levhanın belirli bir kalınlığını veya ölçüsünü ifade eder. Sacın kalınlığını ifade etmek için kullanılan standart bir ölçüdür, alüminyum dahil. 14 ölçülü alüminyum levhanın kalınlığı, kullanılan alüminyumun spesifik tipine veya derecesine bağlı olarak biraz değişebilir. 14 alüminyum göstergesi yaklaşık olarak 0.0747 inç veya yaklaşık 1.9 mm kalınlığında.
ne kadar kalın 14 gauge aluminum plate in inches?
Bir kalınlığı 14 gauge aluminum sheet is approximately 0.0641 inches or about 1.63 milimetre.
| Ölçer | Inch | MM |
| 14 ölçer alüminyum levha | 0.0747 | 1.9mm |
14 gauge aluminum sheet production specifications
Alaşım: Aluminum sheets are typically made from various aluminum alloys, such as 1xxx, 3xxx, 5xxx, or 3xxx series.
Kalınlık: As mentioned earlier, A 14 gauge aluminum sheet is approximately 0.0641 inç (1.63 milimetre) kalın.
Width and Length: Aluminum sheets are produced in various standard widths and lengths, örneğin 36 inç, 48 inç, 60 inç, veya 72 inç. The length of the sheet can be customized according to customer requirements.
Öfke: Aluminum sheets can be produced in different tempers to achieve specific mechanical properties. Common tempers include H14, H16, H18, H22, H24, and others, each offering different levels of hardness and formability.
Surface Finish: Aluminum sheets can have different surface finishes, such as mill finish (unaltered surface from the rolling process), brushed finish, or coated finish
Ambalajlama: Aluminum sheets are typically packed and protected in bundles or wooden crates to ensure safe transportation and handling.
Quality Standards: Aluminum sheet production should adhere to industry and international quality standards, such as ASTM (American Society for Testing and Materials) or EN (European Norms) specifications, to ensure consistent quality and performance.
mekanik özellikleri 14 ölçer alüminyum levha
mekanik özellikleri 14 gauge aluminum sheet may vary depending on the specific alloy and temper of the aluminum. Different aluminum alloys and tempers have different mechanical properties, which makes them suitable for various applications.
Gerilme direnci: Tensile strength is the maximum tensile (pull) stress that a material can withstand without breaking. For typical 14 ölçer alüminyum levha, the tensile strength ranges from about 22,000 ile 27,000 pounds per square inch (psi) veya hakkında 152 ile 186 megapascals (MPa).
Akma dayanımı: Yield strength is the magnitude of stress at which a material begins to deform permanently. İçin 14 ölçer alüminyum, the yield strength can vary from 11,000 ile 24,000 psi (76 ile 165 MPa).
Uzama: Elongation is a measure of how much a material can stretch without breaking during a tensile test. Aluminum alloys generally have good elongation properties, ranging from 10% ile 30% için 14 ölçer alüminyum levha.
Esneklik Modülü: The modulus of elasticity, also known as Young’s modulus, is a measure of the stiffness of a material. For aluminum alloys used in sheet metal, the modulus of elasticity is about 10 million psi or about 69 GPa.
Sertlik: The hardness of aluminum varies depending on the alloy and state. İçin 14 ölçer alüminyum levha, the Brinell hardness (HB) may range in hardness from 40 ile 70.
Fatigue Strength: The fatigue strength of aluminum alloys is generally lower than their tensile strength. It refers to the ability of a material to withstand repeated load cycles without failure. İçin 14 ölçer alüminyum levha, fatigue strength ranges from 8,000 ile 14,000 psi (55 ile 97 MPa), depending on the alloy and temper.
What are the advantages of 14 ölçer alüminyum levha?
14 gauge aluminum plate has the following advantages:
14 gauge aluminum sheet has many advantages in many applications. İşte bazı avantajları 14 ölçer alüminyum levha:
Hafif: Alüminyum hafif bir metaldir, and 14-gauge aluminum sheet is relatively light relative to other metal materials, which makes it particularly advantageous in applications that require overall weight reduction, such as automotive, havacılık, and transportation.
Good Strength and Rigidity: Despite its low density, aluminum excels in strength and rigidity. 14 gauge aluminum plate is strong enough to meet many structural and bracing needs.
Good Thermal Conductivity: Aluminum is a good thermal conductor material, bu yapar 14 gauge aluminum sheet useful in applications that require heat dissipation, such as electronic devices and heat sinks.
Korozyon Direnci: Aluminum has good corrosion resistance and can resist corrosion from most chemicals in both indoor and outdoor environments, bu yapar 14 gauge aluminum popular for architectural and exterior applications.
geri dönüştürülebilirlik: Aluminum is a recyclable metal that can be recycled and reused repeatedly, helping to reduce resource consumption and environmental impact.
Mükemmel işlenebilirlik: special treatments such as wire drawing, kabartma, sandblasting, and color coating can be carried out to meet different needs.
Estetik: Aluminum has an attractive appearance and is available in a variety of finishes and colours, yapımı 14 gauge aluminum very popular for design and decorative applications.
The thickness of the 14 gauge aluminum plate is 1.5mm, which is suitable for various occasions that require strength and light shielding.
In a word, 14gauge aluminum plate is a high-quality material with many advantages, which can be widely used in construction, elektrikli ev aletleri, elektronik, packaging and transportation and other fields.
