무엇인가요 14 게이지 알루미늄 시트?

“14 게이지 알루미늄 시트” 알루미늄 시트의 특정 두께 또는 게이지를 나타냅니다.. 판금의 두께를 표현하는 데 사용되는 표준 측정입니다., 알루미늄을 포함하여. 14 게이지 알루미늄 시트는 사용된 알루미늄의 특정 유형 또는 등급에 따라 두께가 약간 다를 수 있습니다.. 14 게이지 알루미늄은 대략 0.0747 인치 또는 대략 1.9 밀리미터 두께.

얼마나 두꺼운 14 gauge aluminum plate in inches?

두께 14 gauge aluminum sheet is approximately 0.0641 inches or about 1.63 밀리미터.

계량기InchMM
14 게이지 알루미늄 시트0.07471.9mm

14 gauge aluminum sheet production specifications

합금: Aluminum sheets are typically made from various aluminum alloys, such as 1xxx, 3트리플 엑스, 5트리플 엑스, or 3xxx series.

두께: As mentioned earlier, ㅏ 14 gauge aluminum sheet is approximately 0.0641 신장 (1.63 밀리미터) 두꺼운.

폭과 길이: Aluminum sheets are produced in various standard widths and lengths, ~와 같은 36 신장, 48 신장, 60 신장, 또는 72 신장. The length of the sheet can be customized according to customer requirements.

성질: Aluminum sheets can be produced in different tempers to achieve specific mechanical properties. Common tempers include H14, H16, H18, H22, H24, and others, each offering different levels of hardness and formability.

표면 마감: Aluminum sheets can have different surface finishes, such as mill finish (unaltered surface from the rolling process), brushed finish, or coated finish

포장: Aluminum sheets are typically packed and protected in bundles or wooden crates to ensure safe transportation and handling.

Quality Standards: Aluminum sheet production should adhere to industry and international quality standards, such as ASTM (American Society for Testing and Materials) or EN (European Norms) 명세서, to ensure consistent quality and performance.

기계적 성질 14 게이지 알루미늄 시트

의 기계적 성질 14 게이지 알루미늄 시트는 알루미늄의 특정 합금 및 성질에 따라 다를 수 있습니다.. 다른 알루미늄 합금 및 템퍼는 기계적 특성이 다릅니다., 다양한 응용 분야에 적합합니다..

인장 강도: 인장 강도는 최대 인장 (당기다) 재료가 깨지지 않고 견딜 수 있는 응력. 전형적인 14 게이지 알루미늄 시트, 인장 강도는 약 22,000 에게 27,000 파운드/제곱인치 (psi) 또는 약 152 에게 186 메가파스칼 (MPa).

항복 강도: 항복 강도는 재료가 영구적으로 변형되기 시작하는 응력의 크기입니다.. 을 위한 14 게이지 알루미늄, the yield strength can vary from 11,000 에게 24,000 psi (76 에게 165 MPa).

연장: Elongation is a measure of how much a material can stretch without breaking during a tensile test. Aluminum alloys generally have good elongation properties, ranging from 10% 에게 30% ~을 위한 14 게이지 알루미늄 플레이트.

탄성 계수: 탄성 계수, 영률(Young's modulus)이라고도 함, is a measure of the stiffness of a material. For aluminum alloys used in sheet metal, the modulus of elasticity is about 10 million psi or about 69 GPa.

경도: The hardness of aluminum varies depending on the alloy and state. 을 위한 14 게이지 알루미늄 플레이트, the Brinell hardness (HB) may range in hardness from 40 에게 70.

피로 강도: The fatigue strength of aluminum alloys is generally lower than their tensile strength. It refers to the ability of a material to withstand repeated load cycles without failure. 을 위한 14 게이지 알루미늄 플레이트, fatigue strength ranges from 8,000 에게 14,000 psi (55 에게 97 MPa), depending on the alloy and temper.

What are the advantages of 14 게이지 알루미늄 시트?

14 gauge aluminum plate has the following advantages:

14 gauge aluminum sheet has many advantages in many applications. 다음은 몇 가지 장점입니다. 14 게이지 알루미늄 플레이트:

경량: 알루미늄은 가벼운 금속입니다, and 14-gauge aluminum sheet is relatively light relative to other metal materials, which makes it particularly advantageous in applications that require overall weight reduction, such as automotive, 항공 우주, and transportation.

Good Strength and Rigidity: Despite its low density, aluminum excels in strength and rigidity. 14 gauge aluminum plate is strong enough to meet many structural and bracing needs.

Good Thermal Conductivity: Aluminum is a good thermal conductor material, 만드는 14 gauge aluminum sheet useful in applications that require heat dissipation, such as electronic devices and heat sinks.

내식성: Aluminum has good corrosion resistance and can resist corrosion from most chemicals in both indoor and outdoor environments, 만드는 14 gauge aluminum popular for architectural and exterior applications.

재활용 가능성: Aluminum is a recyclable metal that can be recycled and reused repeatedly, helping to reduce resource consumption and environmental impact.

우수한 가공성: special treatments such as wire drawing, 엠보싱, sandblasting, and color coating can be carried out to meet different needs.

미학: Aluminum has an attractive appearance and is available in a variety of finishes and colours, 만들기 14 gauge aluminum very popular for design and decorative applications.

The thickness of the 14 gauge aluminum plate is 1.5mm, which is suitable for various occasions that require strength and light shielding.
In a word, 14gauge aluminum plate is a high-quality material with many advantages, which can be widely used in construction, 가전 ​​제품, 전자 제품, 포장 및 운송 및 기타 분야.