2024 aluminum alloy vs 6061 aluminum alloy The difference between high hardness aluminum alloys, corrosion-resistant high-strength 2000 серия и 6000 серии.

2024 Алюминиевый сплав против 6061 Алюминиевый сплав

2024 алюминиевый сплав и 6061 Алюминиевый сплав — это два сплава с более высокой прочностью и твердостью в серии металлических алюминиевых сплавов., и широко используются в некоторых приложениях, требующих высокопрочных металлов.. Алюминий 2024 и алюминий 6061 имеют много схожих характеристик, и в то же время, между этими двумя сплавами есть много различий.

2024 Алюминий ПРОТИВ 6061 Алюминий

Understanding of 2024 алюминий и 6061 алюминий

Введение в 2024 алюминиевый сплав

2024 aluminum plate is a typical hard aluminum alloy in the aluminum-copper-magnesium system. Its composition is relatively reasonable, its comprehensive performance is good, and it is a kind of hardness. Many countries produce 2024 сплав, which is the largest amount of hard aluminum. The characteristics of Aluminum 2024 alloy are: высокая прочность, certain heat resistance, and can be used as working parts below 150℃. The temperature is higher than 125℃

Сила 2024 alloy is higher than that of 7075 сплав.

The forming performance is relatively good in the hot state, annealing and new quenching state, and the heat treatment strengthening effect is significant, but the heat treatment process requires strict requirements. Corrosion resistance is poor, but it can be effectively protected by pure aluminum coating: cracks are easy to occur during welding, but special processes can be used for welding and riveting. Алюминиевый сплав 2024 is widely used in aircraft structures, заклепки, truck wheel hubs, propeller components and other structural parts.

Введение в 6061 алюминиевый сплав

6061 aluminum alloy is a high-quality aluminum alloy product produced by heat treatment pre-stretching process. Magnesium and silicon alloys are added to it, which greatly improves the hardness. Although the strength of 6061 cannot be compared with 2xxx series or 7xxx series, it has many magnesium and silicon alloy characteristics, excellent processing performance, excellent welding characteristics and electroplating, хорошая коррозионная стойкость, high toughness and no deformation after processing, dense material without defects and easy to polish, easy to color film, excellent oxidation effect and other excellent characteristics.

2024 против 6061 chemical composition comparison

Алюминий 2024 а также 6061 are both aluminum alloys with higher hardness, mainly due to the different element contents.

Reference:wikipedia

2024 алюминий против 6061 aluminum basic characteristics

Алюминиевый сплав 2024 (also known as LY12 aluminum alloy) а также 6061 (also known as LD30 aluminum alloy), the two alloys are different in basic properties.

2024 алюминиевый сплав:

It is a typical hard aluminum alloy in the aluminum-copper-magnesium system, with high strength and good cutting performance, but poor corrosion resistance.
It is usually supplied in T351 state, with good forming performance in hot state, annealing and new quenching state, and significant heat treatment strengthening effect, but strict heat treatment process requirements.
It has high strength and certain heat resistance, and can be used as working parts below 150°C. When the temperature is higher than 125°C, its strength is higher than that of 7075 сплав.
It has good fatigue strength, but it is easy to crack during welding, and special processes are required for welding or riveting.

6061 алюминиевый сплав:

It belongs to the Al-Mg-Si series alloy, with medium strength, хорошая коррозионная стойкость, weldability and machinability.
The main alloying elements are magnesium and silicon, forming the Mg2Si phase, which gives the alloy artificial aging hardening function.
Widely used in various industrial structural parts that require certain strength and high corrosion resistance, such as trucks, tower buildings, корабли, так далее.
Excellent processing performance, easy to color film, and excellent anodizing effect.

2024 алюминий против 6061 механические свойства

2024 алюминиевый сплав:

Tensile strength is high, usually around 470MPa, and conditional yield strength is around 325MPa.
It has good fatigue resistance.

6061 алюминиевый сплав:

Tensile strength is moderate, usually between 241-500MPa (depending on different heat treatment states, such as T6, Т651, и т.п.). Yield strength is also high, usually between 110-276MPa.
It has good toughness and elongation

6061 против 2024 application differences

2024 aluminium alloy

Mainly used to make various high-load parts and components, such as aircraft skeleton parts, skins, bulkheads, wing ribs, wing beams, заклепки, так далее.
Also used to manufacture truck wheel hubs, propeller components and other structural parts.

6061 aluminium alloy

Widely used in building profiles, irrigation pipes, vehicles, racks, мебель, elevators, fences and other fields.
Also used to manufacture industrial structural parts such as trucks, tower buildings, корабли, trams, и железнодорожные транспортные средства.

6061 а также 2024 price comparison

2024 aluminum alloy price:

Due to its excellent strength and hardness, the production cost of 2024 is relatively high, so the price is usually higher.

6061 aluminum alloy price:

Алюминий 6061 has good comprehensive properties and is suitable for a variety of mechanical processing and industrial applications. The cost is relatively low and the price is more economical.