5052 alloy metal aluminum sheet plate is highly resistant to corrosion. It belongs It is an alloy that contains 0.25 percent chromium and 2.5 percent magnesium, and it belongs to 5 series. It’s widely used because of its formability and durability. It has high fatigue and medium static strength. It can be used in marine environments without worry of corrosion. This metal also has excellent thermal conductivity and low density, which is commonly found with other aluminum alloys. Its fatigue properties and endurance limit are excellent. The endurance limit is 125 MPa in an H34 temper and 115 MPa in an H32 temper.

5052 alloy aluminum sheet mechanical properties

Elements Si Fe Cu Mn Mg Cr Zn Ti Others Al
Content 0.25 0.4 0.1 0.1 2.2-2.8 0.15-0.35 0.1 - 0.15 Remain
Alloy
Temper		 Specified thickness Tensile
strength		 Yield
strength		 Elongation
(MPa) (MPa) (%)
5052 HO/H111 0.3~0.63mm 173-213 min66 min 15
0.63~1.2mm min 17
1.2~6.3mm min 19
6.3~50mm min 18
5052 h32 aluminum sheet or 5052 H22 0.4~0.63mm 214-262 min159 min 4
0.63~1.2mm min 5
1.2~6.3mm min 7
6.3~50mm min 11
5052 h34 aluminum sheet or 5052 H24 0.4~0.63mm 235-282 min180 min 3
0.63~1.2mm min 4
1.2~6.3mm min 6
6.3~50mm min 10
aluminum sheet 5052 h36 or 5052 H26 0.1~0.32mm 256-303 min200 min 2
0.32~0.63mm min 3
0.63~4mm min 4
5052/H38 or 5052 H28 0.15~0.32mm min269 min221 min 2
0.32~0.63mm min 3
0.63~3.2mm min 4

5052 alloy aluminum sheet parameters

  • Equivalent name: a5052, aa5052, jis a5052p, al5052
  • Rolling method: Hot rolled ( digital casting, DC ), cold rolled, continuous casting rolling ( CC )
  • Temper: O, H12, H14, H16, H18, H19,H22, H24, H26, H28, H32, H34, H36, H38, H111, H112, H114, H378 etc
  • Size: Custom cut to sizes
  • Thickness: 1.2mm, 1.6mm, 2mm, 3mm, 4mm, 4.5mm, 5mm, 6mm, 7mm, 10mm, 16mm, 20mm, 1/8”, 1" etc
  • Surface Treatment: brushed, mirror finish, embossed pattern etc
  • Standard: ASTM B209, GB/T 3880, EN AW etc

5052 alloy aluminum sheet features

  1. 5252 aluminum sheet has good oxidation and coloring effect, and has better metal texture and metal hardness.
  2. 5252 aluminum sheet is Al-Mg series rust-proof aluminum alloy, which cannot be strengthened by heat treatment.
  3. The chemical composition of 5252 alloy is similar to that of 5A02 alloy, and its properties are basically the same as 5A02. The alloy has higher plasticity and lower strength.
  4. Although 5052 aluminum sheet has medium strength, it has excellent corrosion resistance and is easy to manufacture.

5052 alloy aluminum sheet application

Marine grade 5052 aluminum sheet plate for boat building

  • 5052 aluminium sheet is a commonly used Marine aluminum plate. The 5052 aluminum alloy belongs to the al-mg series alloy, which has a wide range of applications, excellent weldability, good corrosion resistance and cold working performance, moderate strength and good forming and processing performance.Fatigue resistance.Due to its excellent weldability and corrosion resistance, it is very suitable for Marine environment and is an ideal material for shipbuilding.
  • 5052 marine grade alu alloy sheet is the preferred material for high-speed ships, such as fast ferries, yachts and offshore vessels.It is widely used in the manufacture of ship sheet metal parts, bottom plate, porthole, bottom plate and side plate
  • The 5052 Marine grade al sheet produced by our company has no spalling, bubbles, rough surface and local mechanical damage.There are no cracks, rust spots and trace nitrate on the surface of aluminum plate.Is there.There are strict standards and standard quality inspection standards.

Anodized 5052 aluminum sheet plate for decorative parts

5252 aluminum sheets are used in the manufacture of decorative parts with higher strength, such as decorative parts for automobiles. After anodizing, it has a bright and transparent oxide film, so it is also widely used in mobile phone cases, air-conditioning cases, and other fields that require high oxidation effects and metal texture.

  • 5052 high precision flat aluminum cast plates for aircraft
  • 5052 ultra wide aluminum sheets for roof ( roofing sheet )
  • 5052 h34 aluminum sheet for road traffic sign
  • 5052 aluminum sheeting for beer mould
  • 5052 corrugated aluminum sheet

5052 alloy aluminum sheet export countries and regions

Export all over the world: Canada, Malaysia etc

Other 5000 series aluminum sheet plate

5002, 5005, 5010, 5018, 5019, 5020, 5025, 5032, 5038, 5050, 5051, 5053, 5054, 5055, 5056, 5057, 5058, 5059, 5061, 5080, 5081, 5082, 5083, 5085, 5086, 5088, 5154, 5182, 5251, 5252, 5254, 5280, 5356, 5383, 5454, 5456, 5457, 5630, 5650, 5657, 5700, 5754, 5803 etc

Why choose us?

Henan Huawei Aluminum Co., Ltd. is the leader of many aluminum manufactures and suppliers in China. We strictly control the quality and focus on customers. We hope to have in-depth cooperation with you and provide you with high quality aluminium material products custom OEM services. If you want to get the newest and best prices by per kg or per ton standard weight, please contact us.

5052 alloy aluminum sheet packing

Standrad export seaworthy wooden pallet with

  1. Plastic film protection.
  2. Hard Kraft Paper.
  3. Steel Bar Bunch.
  4. Wooden plate.

 

Related Tags: 1.6mm thickness aluminium sheet 5052 h32, 1" aluminum 5052 plate, 1100 3003 5052 aluminum sheet, 1100 3003 5052 aluminum sheet /plate, 16mm aluminium 5052 plate, 2mm aluminum sheet 5052, 3003 5052 aluminum sheet, 3mm 5052 aluminum plate, 3mm aluminium plate 5052 h32, 3mm aluminium plate 5052h32, 3mm aluminum aw 5052 schetered plate, 3mm aluminum aw 5052 schetered plate 1 kg, 3mm aluminum aw 5052 schetered plate 1 kilograms, 5052 1050 anodized aluminum sheet, 5052 5053 5083 aluminum plate, 5052 5083 5005 density of aluminium sheet, 5052 5083 6061 aluminum alloys plate, 5052 5083 marine grade aluminum sheet, 5052 5a02 5252 h32 aluminium sheet for marine, 5052 aluminium alloy plate